SFP to RJ45 Ethernet Media Converter
10/100/1000Base-Tx to 1000Base-FX
This 10/100/1000M Gigabit Ethernet converter is used for backbone network transmission
and is primarily used for Gigabit Ethernet devices links. It converts Optical-Electric Ethernet signals between 10/100/1000M UTP interface (TX) and 1000M SFP socket (FX).
According to customers' requirements, this media converter supports single mode and multimode fibers with a transmission distance of up to 80km for single mode fiber and 550m for multimode fiber. It extends the transmission distance through
its photoelectric conversion network. The media converter takes advantage of intelligent connection
technology to provide auto-negotiation function, no need manually configure or monitor settings.
Feature
Modular design, plug and play
Auto negotiation function allows UTP ports to auto select 10/100/1000M
Full Duplex or Half Duplex
Available in single fiber WDM versions-1310/1550nm wavelength
Support automatic cross of twisted pair ports
Alarm LED illuminates to indicate link failure, easy monitor
Specification
|
Standards |
IEEE802.3z 1000Base-SX/LX
IEEE802.3ab 1000Base-T Gigabit Ethernet
IEEE802.3u,100Base-TX
IEEE 802.3 10Base-T |
|
Wavelength |
Multimode: 850 nm
Single Mode: 1310 nm, 1550 nm |
|
Transmission Distance |
Multimode: 550 m (fiber type: 50/125μm)
Single Mode: 10/20/50/80km (fiber type: 8.3/8.7/9/10/125μm)
UTP: Cat. 5e or Cat. 6: 100 m |
|
Port |
One RJ45 port, One SFP |
|
MDI/MDI-X |
Auto selection |
|
LED Indicator |
PWR: Illuminated for normal operation
ALM: Illuminated when failure occurs on fiber or copper link
LNK/ACT: Fiber link -illuminated when receiving link pulses
from compliant devices, Flashing when data packets are
being transmitted/received |
|
Power Supply
|
Outside: 5 V DC 2 A
Built-in: 100 V to 240 V AC 50Hz to 60 Hz |
|
Operating Temperature |
0 °C to +70 °C |
|
Storage Temperature |
-20 °C to +80 °C |
|
Storage Humidity |
5% to 90% (non-condensing) |
Fused Coupler
