Polarization Insensitive Optical Isolator
Multimode 1310nm, 1550nm
An optical isolator is a passive magneto-optic device that allows light to travel in only one direction. It consists of an input polarizer, a Faraday rotator with magnet, and an output polarizer. It guides optical light in one direction and eliminates back reflection and back scattering in the reverse direction at any polarization sate. It’s characterized Low Insertion Loss Optical Path Epoxy Free, high reliability and low Polarization Dependent Loss and low PMD. It has variety application of amplifiers, Fiber laser, LANs, and Fiber Optic Instruments etc.
Specification
Parameter |
Unit |
Value |
Center Wavelength |
nm |
1310, 1550 |
Operating Wavelength Range |
nm |
±20 |
Typ. Peak Isolation |
dB |
50 |
Min. Isolation at 23℃ |
dB |
40 |
Typ. Insertion Loss at 23℃ |
dB |
0.4 |
Max. Insertion Loss at -5℃-70℃ |
dB |
0.5 |
Min. Return Loss (Input/Output) |
dB |
40 / 40 |
Max. TDL |
dB |
0.1 |
Max. Optical Power (CW) |
mW |
500 |
Max. Tensile Load |
N |
5 |
Fiber Type |
|
Multimode Fiber 62.5/125 or 50/125 |
Operating Temperature |
℃ |
-5 to +70 |
Storage Temperature |
℃ |
-40 to +85 |
Above specification is for device without connector.
For device with connector, IL will be 0.3dB higher and RL will be 5dB lower.
Above specification is measured in low order modes.