Band Pass Filter 1064nm
Bandpass Filter is a micro optics device based on thin-film filter technology. It is designed to block out unwanted noise signals in EDFAs and fiber laser systems. This device is characterized with high isolation, low insertion loss, high return loss, excellent environmental stability and high power handling capability.
Specification: Pass band 5nm
Parameter |
Unit |
Value |
Center Wavelength |
nm |
1064 |
Max. Insertion Loss over CWL+/-2.5nm |
dB |
0.8 |
Min. Pass Bandwidth at 0.5dB |
nm |
5 |
Max. Stop Bandwidth at 25dB |
nm |
22 |
Max. PDL |
dB |
0.1 |
Min. Optical Return Loss |
dB |
50 |
Max. Optical Power (CW) |
mW |
300 |
Max. Tensile Load |
N |
5 |
Fiber Type |
|
HI 1060 Fiber |
Operating Temperature |
℃ |
-5 to +70 |
Storage Temperature |
℃ |
-40 to +85 |
Specification: Pass band 10nm
Parameter |
Unit |
Value |
Nominal Center Wavelength |
nm |
1064 |
Max. Insertion Loss over CWL+/-4.0nm |
dB |
1.2 |
Min. Pass Bandwidth @0.5dB |
nm |
8 |
Max. Stop Bandwidth @25dB |
nm |
22 |
Max. PDL |
dB |
0.1 |
Min. Optical Return Loss |
dB |
50 |
Max. Optical Power(CW) |
mW |
300 |
Max. Tensile Load |
N |
5 |
Fiber Type |
|
Corning HI 1060 Fiber |
Operating Temperature |
℃ |
-5 to +70 |
Storage Temperature |
℃ |
-40 to +85 |
Above specifications are for device without connector.
For device with connectors, IL will be 0.3dB higher and RL will be 5dB lower.