Ploarization Maintaining Fiber Patchcord (980nm, 1064nm, 1310nm, 1480nm or 1550nm)
Ploarization Maintaining Fiber Patchcord
(980nm, 1064nm, 1310nm, 1480nm or 1550nm)
Fiber optic patch cord is a very common device used for linking the equipment and components in optical communication network, it features low cost, simplicity and good durability, the ceramic ferrules make them accurate alignment. It’s widely used in CATV, FTTH, LAN, Optical transmission system. VFIBRE offer many kinds fiber patch cables, FC, SC, ST, LC, D4, DIN, MU, MPO, MTRJ, SMA, E2000 series etc, available for PC/UPC/APC versions, provide single mode, multimode and OM3 cables and Polarization Maintaining jumper too, all the patch cord meet with RoHS compliance.
Specification
|
Parameter |
Unit |
Value |
|
Center Wavelength |
nm |
980, 1064, 1310, 1480 or 1550 |
|
Key Orientation |
|
Slow Axis |
|
Axis Alignment |
deg |
± 3 |
|
Typ. Insertion Loss |
dB |
0.4 |
|
Max. Insertion Loss |
dB |
0.6 |
|
Min. Return Loss |
dB |
50 |
|
Min. Extinction Ratio |
dB |
23 |
|
Max. Optical Power (CW) |
mW |
300 |
|
Max. Tensile Load |
N |
5 |
|
Fiber Type |
|
PM Panda Fiber |
|
Fiber Length Tolerance |
% |
± 10 |
|
Operating Temperature |
℃ |
-5 to +70 |
|
Storage Temperature |
℃ |
-40 to +85 |
Fused Coupler
