Filter WDM Pass980nm/Reflect 1060nm
Filter Wavelength Division Multiplexing (FWDM) is a device for optical wavelength management. It utilizes proven ultra-low-loss thin-film filter (TFF) technology and proprietary design of non-flux metal bonding micro optics packaging. It features small size, high reliability, high extensibility, high channel isolation, epoxy free optical path, simultaneous transmission of multi-wavelength. FWDM has gained prevalence in multi-wavelength digital transport architectures because it enables the use of very low cost uncooled distributed feedback (DFB) laser transmitters. All products meet GR-1209-CORE, GR-1221-CORE requirements. It’s for application such as System Monitoring, Transmitters and Fiber lasers, WDM system, Fiber optical amplifier etc.
Specification
Parameter |
Unit |
Value |
Pass Band |
Wavelength Range |
nm |
960-990 |
Max. Insertion Loss |
dB |
0.8 |
Typ. Insertion Loss |
dB |
0.5 |
Typ. Isolation |
dB |
30 |
Min. Isolation |
dB |
25 |
Reflection Band |
Wavelength Range |
nm |
1020-1080 |
Max. Insertion Loss |
dB |
0.6 |
Typ. Insertion Loss |
dB |
0.3 |
Typ. Isolation |
dB |
15 |
Min. Isolation |
dB |
13 |
Optical Return Loss |
dB |
50 |
Max. PDL |
dB |
0.1 |
Typ. PDL |
dB |
0.05 |
Thermal Stability |
dB/℃ |
≤0.005 |
Max. Optical Power (CW) |
mW |
300 |
Max. Tensile Load |
N |
5 |
Fiber Type |
|
HI 1060 fiber |
Operating Temperature |
℃ |
-5 to +70 |
Storage Temperature |
℃ |
-40 to +85 |
All above value is for without connector.
For device with connectors, IL will be 0.3dB higher, RL will be 5dB lower.