Planar Lightwave Circuit Splitter
Single Mode 2xN
Planar Lightwave circuit (PLC) splitter is a device designed to manage optical power. It’s fabricated silica optical waveguide technology to distribute optical signals from center office to multiple premise locations. It features small size, low insertion loss, high reliability, wide operating wavelength range and good channel-to-channel uniformity, and is widely used for PON networks to realize optical signal power splitting and FTTX Systems with low-cost. VFIBRE provides 1xN and 2xN (N=2 to 64) splitter in tube and module box package. All products meet GR-1209-CORE and GR-1221-CORE requirements.
Specification
Parameter |
Unit |
Value |
Operating Wavelength |
nm |
1260 ~ 1650 |
Configuration |
|
2x2 |
2x4 |
2x8 |
2x12 |
2x16 |
2x24 |
2x32 |
2x64 |
Insertion Loss |
dB |
<4.3 |
< 7.6 |
< 11.0 |
< 12.8 |
< 14.8 |
< 16.8 |
< 17.9 |
< 21.5 |
Uniformity |
dB |
<0.3 |
< 0.4 |
<0.45 |
< 1.0 |
< 0.55 |
< 2.0 |
<0.6 |
<0.7 |
Polarization Dependent Loss |
dB |
≤0.3 |
≤0.4 |
≤0.4 |
< 0.3 |
< 0.5 |
< 0.4 |
< 0.5 |
< 0.5 |
Directivity |
dB |
55 |
Return Loss |
dB |
50 |
Operating Temperature |
℃ |
-40 ~ +85 |
Storage Temperature |
℃ |
-40 ~ +85 |
Pigtail type |
|
Bare fiber, ribbon, fanout |
Fiber Type |
|
Corning single mode SMF-28e or equivalent |
Connector Type |
|
FC, SC, LC, ST, or Custom specified |
Power Handling |
mW |
300 |
Package Dimension |
mm |
Stainless steel tube, ABS module enclosure, 19inch Rack-mount
Mini module, PLC splitter Wall mount |
Measured at room temperature and excludes connector loss.
For devices with connectors, insertion loss will be 0.3dB higher.